ER32 220V Square Spindle Motor Air Cooled and 50 similar items

Product Overview Spindle motor has the advantages of fast speed, small volume, lightweight, low material consumption, low noise, low vibration.It is widely used in wood, aluminum, metal, stone, metal, plastic and other materials carving processing, widely used in many industries, can greatly improve the processing quality and accuracy. Product Parameters--053288 Voltage: 220V Power: 4.5kw(6HP) Current: 20.45A Operating Frequency: 300Hz Collet Nut: ER32 Clamping Range: 0.118"-0.787"(3mm-20mm)[Standard with 6mm collet, if you need other sizes please contact us] Clamping Diameter of Collet: 0.236"(6mm) Motor Speed: 18000rpm Cone Hole Beat: 2UM Cooling Mode: Fan Cooling Lubrication Mode: Grease Lubrication Fuselage Material: Pure Aluminium Product Size: 14.8"*5.4"*6.1"(37.5cm*13.7cm*15.5cm) Net weight: 29.1LB(13.2kg) NOTE: Spindle motor must be equipped with frequency converter.Set up frequency converter correctly according to machine requirement. The item is not included frequency converter. Product Parameters--053149 Voltage: 220V Power: 6KW(8HP) Current: 27.27A Operating Frequency: 300Hz Collet Nut: ER32 Clamping Range: 0.118"-0.787"(3mm-20mm)[Standard with 6mm collet, if you need other sizes please contact us] Clamping Diameter of Collet: 0.236"(6mm) Motor Speed: 18000rpm Cone Hole Beat: 2UM Cooling Mode: Fan Cooling Lubrication Mode: Grease Lubrication Fuselage Material: Pure Aluminium Packing size: 17.7"*8.3"*7.9"(45cm*21cm*20cm) Net weight/Gross weight: 32.4LB(14.7kg)/33.7LB(15.3kg) NOTE: Spindle motor must be equipped with frequency converter.Set up frequency converter correctly according to machine requirement. The item is not included frequency converter. Product Parameters--056291 Voltage: 220V Power: 7.5KW(10HP) Current: 30.09A Operating Frequency: 300Hz Collet Nut: ER32 Clamping Range: 0.118"-0.787"(3mm-20mm)[Standard with 6mm collet, if you need other sizes please contact us] Clamping Diameter of Collet: 0.236"(6mm) Motor Speed: 18000rpm Cone Hole Beat: 2UM Cooling Mode: Fan Cooling Lubrication Mode: Grease Lubrication Fuselage Material: Pure Aluminium Packing size: 20.1"*9.1"*8.7"(51cm*23cm*22cm) Net weight/Gross weight: 37.5LB(17kg)/39.0LB(17.7kg) NOTE: Spindle motor must be equipped with frequency converter.Set up frequency converter correctly according to machine requirement. The item is not included frequency converter. Optional Specifications Product Number Voltage Power Nut Type Clamping Range 053290 220V 2.2kw ER25 1mm-16mm 053289 220V 3.5kw ER20 1mm-13mm 053288 220V 4.5kw ER32 3mm-20mm 053149 220V 6.0kw ER32 3mm-20mm 056291 220V 7.5kw ER32 3mm-20mm Product Features Advantages - Through the inverter to adjust the output voltage and frequency can be achieved 0-18000 stepless. - High precision bearing and pure copper coil, high machining accuracy, long service life. - Pure aluminum body, anti-oxidation and anti-corrosion, lighter weight. - Adopt precision steel ball holder to ensure spindle rotation accuracy in high speed grinding. - Lubricating grease resistant to high temperature of 200?, low noise. Matters Need Attention - must match the drive spindle chosen correctly according to the electric spindle nameplate good debugging power, voltage and frequency. - Set the frequency converter should be set command channel, and then set the display channel, and finally set the parameters. When setting parameters, be sure that the reference frequency, the frequency of the three highest rated frequency and consistency. - The spindle is generally clockwise in the wrong direction, the drive can change settings or swap any two rotating wire the inverter output UVW terminal on. - In general, water-cooled spindle surface temperature and ambient temperature greater than 20 degrees, the heat can be considered a spindle; when air-cooled spindle surface temperature greater than ambient temperature of 30 degrees, can be identified as the main heat seriously, immediately shut down cooling, a check. Product Presentation Details Item Included(053288) Spindle Motor *1 Fork Wrench *1 Collet Wrench *1 Item Included(056149) Spindle Motor *1 Fork Wrench *1 Collet Wrench *1 Item Included(056291) Spindle Motor *1 Fork Wrench *1 Collet Wrench *1 You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.